When it comes to home improvement plans, bathroom renovation projects are usually at the top of the list. Bathrooms get renovated more often than the other rooms, because it is the most frequently used room in the house. Bathroom renovation is not only when you want to sell your home. A renovation project can increase the value of your home and improve the quality of your life. It also gives you a comfortable bathroom where you can be relax and refreshing yourself. It can be a boring task, but a little planning could help your life much easier later on. In this article, you will learn how to transform your old bathroom to its new look.
9 things to take into account when choosing a new tub
How much space do you have?
Today bathtubs are also designed to accommodate two people instead of just the more common bathtub for one. They are larger simply because they are roomier. Homeowners should consider the available space in their existing bathroom first before selecting an option to purchase a two-person bathtub. If the inclusion of a tub this size cuts down on the roominess of your bathroom, you might want to opt not to purchase it.
How much money can you afford to spend?
The type and model of a bathtub that you purchase will determine the price range that you can expect to pay. The standard tub is by far the least expensive tub. The more features or custom designs that you add to a bathtub, the more expensive the bathtub will be. Whirlpool tubs are more expensive than standard bathtubs. An air-jetted bathtub is more expensive than a water-jetted bathtub. Soft bathtubs and claw-footed bathtubs are also more expensive than standard tubs.
Do you want a jetted tub?
If you think that opting for a whirlpool tub is an easy decision, think again. You will still be faced with deciding between air jets and water jets in the tub. Air jets are quieter than water jets. Plus, with an air-jetted bathtub, the bather can enjoy a bubble bath, bath laced with scented oils, or a bath that is generously filled with sea salts. Water jetted tubs on the other hand do not offer the same possibilities.
Additionally, a bathtub with water jets will provide stronger more vigorous bursts of water, while an air-jetted bathtub will present weaker bursts of water. Alternatively, water jets are fewer in number than air jets in a tub. Since the models vary, it’s important to take notice of the placement of the jets within each particular model of jetted tub.
Do you want a hard or a soft bathtub?
The hard bathtub is the least expensive of all of the models. It is also the one that you find in the homes of most people. This type of bathtub usually fits into the corner of the bathroom, sits upon the floor, is rectangular in shape, and is available in a limited assortment of colors. It is also going to require a bath pillow if you intend to lounge for any period of time. On the other hand, a soft bathtub mirrors most of the above characteristics. Soft bathtubs are rectangular in shape, sit upon the floor, fit into the corner of most bathrooms, and are sold in a small variety of colors. The biggest difference is that this type of bathtub has soft cushioning and a non-slippery surface to offer to its occupants.
Will a specific tub hurt the resale value of the home?
Today’s bathtubs are available in a wide variety of sizes, shapes, colors, and more. Homeowners who are considering purchasing something out of the ordinary should also consider the impact such a decision could make on the resale value of the home.
Is your electrical up to code for the model of bathtub that you are getting?
Some of today’s more deluxe bathtubs require electrical wiring. Homeowners should always check to ensure that their existing electrical set up could support any new acquisition to the home’s furnishings
Does the color blend in with the décor of your bathroom?
Although the color of the bathtub might seem to be a minor concern compared to some of the other issues, it could quickly become a major one. If the color of the new tub does not blend well with the existing décor of the bathroom, you could be looking at some expensive remodeling costs.
How will you dispose of your old bathtub?
Disposing of an old bathtub can be difficult for some individuals. You need to discuss the removal of the old bathtub with the company from whom you are purchasing the new one. Will they take it away for a small fee? If removal is not part of the service, even for an added fee, then you need to investigate your other options such as checking with your trash removal company and scrap yards.
What type of repairs are you going to have with a particular tub?
Obviously, the custom designed bathtubs will be the most expensive to repair. A claw foot bathtub has exposed pipes, making plumbing repairs a relatively simple task. The jetted tubs will be the most expensive to repair, especially since electrical wiring is part of the package.
Tools You’ll Need to Replace a Bathtub
- Adjustable wrench
- Pry bar
- Phillips and Flathead screwdriver
- Channel lock pliers
- Slip-joint pliers
- Safety glasses
- Shower stem socket wrench
- Keyhole saw
How to Install a Bathtub
Before removing the tub, shut off the water supply. If the bathroom doesn’t have a separate cutoff valve, turn off the water to the entire house.
- Open a valve at a lower level in your home to relieve any remaining pressure in the lines.If you don’t have a lower level, flush the toilet, and turn on 2 other faucets in the house.
- Tub drains have different components that first need to be removed, so procedures on this step may vary. The one here has a stopper that unscrews, allowing you to access the drain flange at the bottom of the tub.
- Use a tool designed for tub drain removal to remove the drain flange
- Use the screwdriver to disconnect and remove the waste and overflow valve cover on the side of the tub.
- Remove the tub spout since this will be on a portion of the wall you’ll be cutting away. Some spouts have a setscrew that holds them in place. If you don’t find one, your spout should just twist off by turning it counterclockwise.
- To disconnect the drain, you need to gain access to the underside of the tub, either from behind the wall or through the ceiling or floor below the bathroom.
- Use a pair of channel lock pliers to disconnect the pipes below the tee where the drain and overflow valve meet. If your fittings on your bathtub drain are galvanized steel, you may need a penetrating lubricant like PB Blaster to loosen the joints first.
- Once you’ve loosened the nut connecting the drain pipe, unscrew it the rest of the way by hand and lift out the entire section.
- Cut out a section of drywall approximately 6 inches above the tub on each of the three sides. To make repairing the wall easier, measure a standard distance up from the top of the tub.
- Use a straight edge to mark a guideline all the way around. Cut along the line with a drywall saw and remove the section between the line and the tub all the way down to the studs.
- Clear everything away so you have access to the screws or nails attaching the tub flange to the studs.
- Remove the screws or nails all the way around the top and sides of the tub with a pry bar. Also remove any trim moulding from the sides of the alcove.
- Cut away any caulk between the tub and floor with a utility knife.
- One person should lift up the front edge of the tub, while another slides a couple of 1 x 4s underneath it to get it off the floor.
- Slide the tub out of the alcove using the 1 x 4s as skids.
- Remove any stringer supports left on the wall. The stringer is the crosspiece that supports the edge of the tub.
- With the alcove now exposed, clean the area and remove any nails or debris that’s left over.
- How you dispose of the old tub will depend on the type it is. Cast iron tubs should be broken up with a sledgehammer. Because of the sheer weight, do this in the bathroom so you can remove the tub in sections.
- All other types of bathtub material are relatively light. The tub can be removed whole as long as you have some help. Steel, composite or fiberglass tubs can be cut up with a reciprocating saw. Porcelain over steel tubs should be disposed of whole.
- Make sure the subfloor is level, and if necessary, use a leveling compound to even out the surface.
- Many tubs have a sound deadening and leveling pad on the underside, and this pad needs to rest fully on the subfloor.
- Use your helper to carefully set the tub onto the skids and slide it into place in the alcove.
- Once it’s in position, check to see if the tub is level, and if necessary use shims to even it out.
- Take a pencil and mark a reference line on the studs all the way around on all three sides. After doing this, take out the tub and set it aside.
- Since you’ve already marked the top edge of the flange on the studs, you’ll need to allow for the height of the flange to install the stringer.
- Take the height and measure that same distance below the reference line on each stud. This new mark will serve as the top edge of the stringer you’ll install.
Cut a 2 x 4 the length of your tub, and use deck screws to attach it to the studs on the new reference marks.
- To put in the drain, turn the tub on its side and install it according to the manufacturer’s instructions.
- Take a bit of plumber’s putty, roll it in your hands and place it on the underside of the drain flange.
- Position the drain shoe on the underside of the tub, and screw the drain flange into the threads. Tighten it down completely with the drain tool and remove any excess putty.
- To connect the overflow valve, place the rubber gasket onto the overflow elbow, and position it behind the tub.
- Attach the cover plate inside the tub to the overflow elbow and gasket behind the tub.
- Connect the overflow pipe and drain pipe with a tee where the two meet.
- Install the drain strainer onto the flange.
- Carefully move the tub back into place. As you do, make sure not to disrupt the drain assembly you just attached. When it’s in position, the flange should rest on the stringer that was just installed along the back wall.
- Make sure the drain and overflow plumbing coming out of your tub is aligned with the rough-in drain outlet in your bathroom.
- Connect the pipes together and tighten them down snugly, but don’t over-tighten.
- Before securing the tub, make sure the top of the flange lines up with the reference marks you established earlier. If it does, go ahead and attach the tub flange to the studs with roofing nails. Secure the flange on all three walls, as well as the sides of the tub. (Do not drill the flange. Instead use the head of the fastener to hold the flange down.)
- With the tub in place, finish off the wall with drywall and paint.
- Reinstall the baseboard and finish moulding around and in front of the tub.
- Reattach the spout.
When renovating your bathroom you may run into wood that has been damaged from old water leaks, if you do properly fixing the wood at that time is important, this post will explain how to fix rotted or spongy wood.
Choosing Your New Toilet for the Bathroom Remodel
While remodeling the bathroom, there are plenty of homeowners who choose to have their old bathroom toilet replaced with a new one.
Should you be needing a new bathroom toilet, there are a variety of important factors that you will need to consider. One of the factors is the other remodeling which is being undertaken. If you are planning on remodeling the rest of your bathroom, you will want to make sure that you pick a bathroom toilet that will complement the rest of your soon to be newly remodeled bathroom. Having everything match, from the toilet to the floor tiles, is truly one of the most effective ways to create a beautiful bathroom.
In the United States, most of homes have a standard toilet in them. Standard toilets are another way of describing traditional model toilets. Most standard model toilets come in white and they are, well, simply standard. If you happen to be remodeling the bathroom on a budget, you will be able to benefit from the purchase a standard model bathroom toilet. Standard bathroom toilets tend to be known as being the least expensive of all bathroom toilet models. While you might be shopping with limited funds, you may also be shopping for the best toilet around. When that is the case, you may be searching for something different, say something a bit more stylish. In that case, you will be able to discover it, with a little bit of research.
7 Tips to Choosing the perfect toilet
- The shape of the toilet bowl: The main choices here are an elongated bowl and a round front bowl. The round front tends to be two inches shorter, and works well for smaller spaces. The larger elongated front is more comfortable and sanitary, since there is less drip on the toilet.
- The toilet size: There are lots of choices, with different lengths, widths and heights. Make sure you measure the space available for the toilet to ensure a comfortable fit. You also need to consider the rough-in space, which is how far the center of the toilet bowl is from the finished wall, since this limits the size of the toilet.
- The size of the toilet trapway: The trap way is that part of the toilet that through which the water and waste exit. The minimum standard allows waste with a diameter of 1 ½ inches to pass through. You may want to consider looking at a larger trapway to minimize clogging problems.
- The flushing system: In the US, by law all toilets must have a 1.6 gallon tank to conserve water. However, you do still have some choices.
o In gravity fed toilets, the weight of the water from the tank pushes the waste through an S shaped trap way, as the siphon that is created empties the bowl.
o With pressure assisted toilets, air in the tank is compressed as it fills with water. When flushing, the pressurized air pushes the water more strongly into the bowl, resulting in a better flush. Disadvantages, though, include greater noise, expense and difficulty of repairing.
- One or two piece toilets: Two piece toilets are more common and inexpensively priced, and have a separate tank and bowl which are connected when the toilet is installed. One piece toilets have 5 or six parts that are seamlessly connected into one piece. They tend to more stylish, more expensive, easier to clean, and smaller, making them ideal for smaller spaces.
- Maintenance features: Some toilets have features designed to make it easier to take care of them. For instance, Toto, an innovative Japanese manufacturer, has SanaGloss, a ceramic glaze which prevents bacteria and mold buildup, making the toilet easy to clean. American Standard has its EasyClean feature. Kohler has an insulated liner for some of its toilet lines, preventing moisture build-up on the outside of the tank due to condensation.
- Appearance: while a toilet needs to work well, it also needs to look good in your bathroom. Fortunately, today’s toilets come in a huge selection of colors and sizes. Bear mind, though, that choosing a color other than white can significantly add to the toilet’s price. One approach you may to consider is to choose a toilet that is part of a bathroom suite, thus ensuring that are the fixtures are in harmony.
When choosing a new toilet for your next bathroom remodeling project, it is important to be concerned with the appearance of a toilet, but it also important to be concerned with the cost of one. Although it is possible to purchase a standard toilet for only a few hundred dollars, you need to keep additional costs in mind. As you likely already know, bathroom toilets are heavy; therefore, you may need assistance getting your toilet into your home. Depending on where you shop, you may be able to get free delivery, but you should also be prepared for a small delivery fee. Also, if you need assistance with installation, you will need to keep installation costs in mind.
As you can see, there is a large amount of decision making that does into choosing your next bathroom toilet. Even though it may take a little bit of research and time, to find the perfect toilet, the results will almost always be worth it
Installing your new toilet
Most toilets are sold with the necessary gaskets, washers, and hardware for fitting the tank to the bowl. However, you might need to buy a few parts. Here is a list of what you need to complete this task:
- Toilet bowl,
- Toilet tank,
- Toilet seat,
- Two 1/4″ bolts for bowl to flange,
- Wax ring,
- 20″ water supply with fitting at valve or floor connection.
- Pair of channel pliers,
- screw driver.
5 Steps to Installing Your Toilet
Shut off the water to the toilet, use a bucket and a cloth or a sponge to remove the water left in tank and bowl after you flush the toilet.
- Using a pair of channel pliers, or a small pipe wrench (8″), remove the nut where the water line fastens to the ballcock valve under the left side of the bottom of the tank. Next use a small crescent wrench, remove the two 1/4″ nuts holding the bowl to the floor flange. Remove old toilet. Remove the water line from the valve or fitting at floor or wall.
- Now you are ready to install your new toilet. Put the two 1/4″ bolts in the side holes of the flange with the bolt head in the flange. Put some of the old wax at this spot to hold the bolts straight up and across from each other. Put new wax ring on flange, flat side up if tapered.
- Set new bowl only straight down so it centers on wax ring and both bolts come through holds on each side of bowl. Sit on bowl facing wall until your weight puts bowl flush with the floor. Put metal washers and nuts on bolts and tighten until snug. Do not over-tighten as you can crack the bowl. Tighten these again after toilet is completely installed and filled with water.
- Next put 2″ rubber gasket on tank where it sets on the bowl, put rubber washers on bolts provided under the bolt head so they will be on the inside of the tank. Pick up tank and set on bowl over holes in bowl where bolts go through. Sit on bowl facing wall. Put bolts on from the inside of the tank into holes in bowl, put on metal washers and nuts and tighten. Hold tank level and tighten so it brings tank down level. Use a large screw driver inside tank and a crescent wrench or end wrench to back up nut under bowl. Tighten with screw driver. Hook water supply to tank, turn on water, check for leaks, and snug up the bolts holding bowl to floor. If there is a space between the back of the tank and the wall, put a spacer of sort there to brace tank. A piece of wood or hard rubber works fine.
Maintenance for Your New Toilet:
At least twice a year clean out the inside of your toilet tank. When cleaning the toilet tank, turn off the water, flush toilet once, add small amount of cleaning detergent inside tank to water remaining and use a cloth or brush to clean. Also clean out holes under toilet seat and rim of the bowl as well as the 3/4″ hole in the bottom of toilet bowl. Replace rubber tank ball at this time if needed. Maintaining your new toilet will keep the plumber away and reduce your plumbing bill.
Check Out: 5 Quick Fixes for Your Home’s Bathroom if you can’t afford a full renovation.
Picking the Right Bathroom Cabinets
First, you will want to define how many cabinets you want and the size of the cabinets you need. Do you want a base cabinet, a medicine cabinet, a standalone cabinet, or a combination of all of the latter? Figure out where you plan to install or place a cabinet in your bathroom and measure the area so you know the dimensions of the bathroom cabinets you require. You not only need to know the height of the cabinet you need, but you will have to measure the depth of the cabinet area too.
In terms of style, you have a lot to choose from; bathroom cabinetry includes closed cabinetry like medicine chests, recessed cabinetry, wall cabinetry, and base or vanity offerings. You can also get bathroom cabinets that are open and that have a lot of shelving. Standalone offerings include linen cabinets, towers, and storage cabinetry too. You will need to reflect on what you plan on storing in your bathroom now and in the future. Do you want cabinetry for medicines and personal items? Do you want cabinetry for your linens and towels? You should think about these issues as you shop.
For more advice on bathroom cabinets, check out our Bathroom Cabinets Guide
Pick the Right Bathroom Faucet
Bathroom faucets come in various colors, styles and shapes. There is something out there for everyone. You may be interested in the stainless steel, most traditional look. But, do not over look the other options out there too such as the brass and brushed nickel versions. Even chrome is a good choice for a faucet in some homes. To find the right one for your home, consider the benefits of choosing one over the other. There are many things that can help persuade you one way or the other.
All about Stainless Steel Faucets
The most traditional and probably the most common bathroom faucet is that of stainless steel. These are long lasting products that will provide you with a blend of materials, namely steel alloys and chromium. These are the least expensive of products and offer a wide range of looks as well. The benefits of this product are simple. They will last a long time because they do not rust. They are easy to clean. They match virtually any décor that you put them into. You never really need to do any updating of the metal. On the other hand, there are some negatives to think about too. For example, bathroom faucets made from stainless steel are often the most likely to show fingerprints on them. They can be scratch, which can lead to rusting in those locations. They can become dull in appearance, too.
All about Chrome Faucets
Another option for faucets that you have is chrome. Chrome is actually created over solid brass fixtures that have a process called electroplating done to them. The coloring of chrome is the same silver from your stainless steel, mostly. They are affordable options and you will find that some of the more high end, fancy versions are expensive. There are many benefits of investing in chrome for your faucets. For example, they do not scratch and therefore do not rust. They also are going to last you a long time without showing too many signs of aging. Chrome will show water spots but they can easily be cleaned off. If you over clean the chrome or use abrasive chemicals on it, it can become dull over time because of chrome finish will wear off.
All about Brushed Nickel Faucets
Yet another option for faucets is brushed nickel. This is one of the newest products out there and is made by electroplating which is done over the top of solid brass. There are many options to consider in styles because they are so popular. What’s more, there is a range of pricing including affordable products. The benefits of this product are that they do not show scratches and fingerprints are easily hidden. They do not tarnish over time. The downfall that they have is that the plating can wear away over a long period of time.
Choosing the best bathroom faucets means to consider all of these options carefully.
Once you have selected the right faucet, replace it yourself following this guide
Tips to Choose the Right Bathroom Sink
Bathroom sink comes in very wide variety of shapes, designs, colors and price range. It could be daunting task to buy one if you have not prepared yourself in advance. Here are some tips to prepare you in choosing the appropriate sink for your bathroom.
The very first thing you need to do is to decide your limitations. To decide your limitations, you need to set budget. Like I said before, sinks comes in every price range depending on the quality and design. Deciding budget helps you in choosing the appropriate sink that matches the theme of your bathroom within your limit.
- Decide which type of sink you want to buy. There are so many different type of sinks available like Pedestal sink, console sink, wall mounted sink, basin sink, vessel sink and utility sink. Each sink has his own characteristics and benefits. Choose one which can be easily installed in your bathroom.
- Bathroom sinks comes in a very wide variety of materials. There are glass sinks which are being made with glass. Then there are stainless steel sinks, ceramic based material sinks, enameled cast iron sinks and solid surface material sinks. Decide which material sink works best in your bathroom.
- Some commonly used bathroom cleaners may not be compatible with all sink materials. Don’t just assume that the sink material you have chosen can be cleaned by any sort of chemical cleaner. Glass sinks are high maintenance sinks whereas wood sinks can be cleaned easily. Get detailed knowledge about care requirement of particular sink before buying.
Steps to Replacing Your Bathroom Sink
First, you must gather all the tools and materials needed to complete the job.
Tools needed to replace sink
- Adjustable wrench or set of wrenches
- Basin wrench
- Razor knife(cutting old caulk)
- Caulk gun
- Teflon tape
Seriously THAT is all the tools you’ll need.
17 Steps to Replacing Bathroom Sink
1. Go underneath the sink. Turn off the water. Loosen the collar nuts on the drainpipe.
2. Drain any excessive water, and then remove the drainpipe.
3. Loosen the nuts that hold the pop-up assembly in place under the sink using slip-joint pliers.
4. Unscrew the pop-up flange in order to free the assembly underneath the sink.
5. Remove the fittings that join the supply lines of the old faucet to the shutoff valves, using a wrench.
6. Repeat the steps 4-15 as explained above for replacing kitchen faucet.
7. Now, you have to install the pop-up assembly.
8. Push the pop-up rod down through the body of the faucet.
9. Attach the flat bar.
10. At the bottom of the new flange, use a little plumber’s putty to hold the tailpiece so that the whole assembly protrudes up through the drain hole in the sink.
11. Spin the ring to position the same with the tailpiece under the sink.
12. In order to secure pop-up housing in place, tighten the nut on top of the tailpiece.
13. Hook up the pop-up lever onto the flat bar in order to secure it to the pop-up housing.
14. Drop the stopper into the drain hole.
15. Replace the drainpipe.
16. Tighten the collar nuts.
17. Turn on the faucet and check for leaks.
Bathroom Flooring: Pick the Right Kind
Make a Small Bathroom Look Larger with the Right Kind of Floor
Most people have to deal with bathrooms that are relatively small. There’s just no getting around it. However, there are ways to make a small bathroom look a lot larger. One of the best ways to do so is by choosing your flooring with care. A light-colored floor is one of the simplest yet most dramatic ways to give a small bathroom a much more spacious look and feel. Better still, use similar tones for the walls and the floor to create the illusion of a lot more space.
Why Ceramic Works Best
If you’re looking for a bathroom floor material that is affordable, attractive and easy on bare feet, you should make a beeline for ceramic. This type of floor material can include many unique textures and designs that go along with virtually any interior design scheme. Ceramic is wonderfully waterproof, too, which is a critical point when it comes to designing a bathroom – nothing is worse than stepping onto a damp, soggy floor. Ceramic tiles are available in a breathtaking array of different styles, sizes and designs, too, making it a snap to get the look that is right for you.
Check out the Bathroom Tile Selection Guide for more ideas
Vinyl: A Suitable Choice
Vinyl feels great underfoot; it’s also very waterproof and a snap to maintain. Best of all, vinyl flooring is very affordable. A wide variety of different patterns and designs are available, making it a versatile and exciting choice for the bathroom. Put vinyl near the top of your list if you want to stick to a strict budget while still achieving a stylish and attractive look.
Learn how to lay vinyl flooring in this post
The Trouble with Marble
Some people believe that marble is the be-all, end-all in terms of bathroom floors. However, marble is a highly porous material; it is also very soft. What that means is that it absorbs and retains moisture with ease. In the bathroom, that can spell major trouble. As beautiful and luxurious as marble may be, it is generally not a suitable choice for the bathroom.
Why Carpeting isn’t Ideal for the Bathroom
While it’s fine to throw down a few colorful rugs in a bathroom, having wall-to-wall carpeting installed isn’t a very smart move. Carpet needs to stay as dry as possible; even if you are a stickler about not stepping onto your carpet with sopping wet feet, the moisture in the air will wreak plenty of havoc. While carpet feels wonderful beneath the feet, it just isn’t a practical choice for the bathroom. Invest in a few cute area rugs and leave the carpeting for other parts of the home.
Want Wood? Try Laminate Flooring Instead
The idea of a luxurious wood floor in the bathroom may sound great, but it is fraught with all sorts of issues. A wood floor must be impeccably installed in order to stand a chance in the bathroom, where moisture and standing water can destroy it in no time flat. Plus, wood must be finished in a precise way in order to make a go of it. If you’d like the look of wood in a material that can withstand the perils of the bathroom, laminate flooring may be for you. It is available in many wood-style finishes that will make your bathroom look amazing.
Hopefully you find this bathroom remodeling guide helpful. Here at All Around the House we are dedicated to total home improvement.
Please share your before and after bathroom remodeling photos in the comments.