Dimmer Switch Installation
One excellent way to create a fresh mood in a room is with the lighting. But of course you can only add or remove so many lamps. So that next best option is to add a Dimmer switch. I mentioned this a little while ago when discussing the installation of track lighting.
It is really not that difficult but it is very important to take the proper precautions.
DO NOT JUST TURN OFF THE SWITCH!!!
This is not going to kill the live wires in that area. When you have chosen which light and thereby switch that you want to change turn that light on. Then start throwing the breaker switches until that light goes off. Once this is done, remove the switch cover. Before you start removing things it is still a good idea to double-check for power at the switch. If you have an electrical meter, set it for a low voltage setting at start touching wires. If it is all clear then start pulling the switch out. Once the switch is pulled out either unscrew the screws holding the wires tight, or find a very thin flat-blade screwdriver to insert int the slots to free up the wires.
Check Out: How to Replace Light Switch
Once the old switch is out you can start to assess if there is any changes you need to make to get the dimmer switch to fit. Most switches should fit just fine but that is something to keep in mind when shopping.
Once it fits just wire it up. This is generally accomplished by inserting the wires into the proper holes until the click and are locked into place.
Screw the switch back into place. Normally you will not be able to use he old plate, but they generally come with their own plates to dress it up a bit. Once its all in place then turn the power back on.
With the power turned on try the real test. Dimmer switches actually draw more juice so it is possible that your breaker switch will go over when you use the switch. If this is the case you may want to move the switch elsewhere, or talk to an electrician.
As always, before messing with electricity it is a good idea to talk to an electrician or the electrical person at your local hardware store.
Comments are closed, but trackbacks and pingbacks are open.