lawn problems: bare areas

Not a single person wishes for bare areas in their yard. They can be unattractive as well as may possibly suggest much larger lawn problems. Unless fixed, bare spots could continue to increase. Fixing a bare area is an easy task you are able to do on your own.

Bare areas in your yard may be the consequence of heavy foot traffic (creating soil compaction), drought, disease, chemical burn and weed or insect infestation. Before you begin fixing, you have to figure out the reason behind your problem. This should help you put a stop to it from continuing.

lawn problemsIn the event that heavy foot traffic is the factor, check for an effective way to keep traffic from that location. This could consist of putting in stepping stones, a gravel walkway or perhaps a wall that will reroute traffic and also preserve that part of your yard.

In the event that insects or disease are the reason, figure out the precise cause. Nearly all treatment options will have to be put on and allowed to perform prior to when you might grow grass. The treatment product directions will explain to you just how long to put off before sowing new seed.

If the turf has been damaged by pet urine, it will resemble a patch of straw in the center with a dark green ring around the outside. The urine acts much like a fertilizer burn. Ohio State University scientists recommend watering the area to dilute the concentration of urine. If you are able to keep the pet off the lawn, the grass can be reseeded.
After you have sorted out the lawn problems causing the bare areas, it’s time for you to fix the damage. For most spots, the best answer is usually to replant the bare area with new grass. There are lots of solutions:

You can use grass seed and fertilizer independently. Distribute straw as a mulch after planting the grass seed to help to keep it damp as well as protected from birds.

Check out our review of the Top 3 Liquid Lawn Fertilizers to help fix your bare patch.

Lawn patch products blend grass seed, fertilizer and mulch mixes in a single bag.
Seed germination blankets made out of wood fibers retain seeds and soil in place for erosion control.
When on the market, sod is a possibility. Because it is alive, ensure that it stays damp until you are ready to install it. Make certain the sod makes good contact with the prepared dirt bed.

Click here for more tips to learn how to grow grass

Best time to address Lawn Problems

Springtime is an excellent time for you to plant and fix bare areas and other lawn problems in warm season grasses. Early autumn is the most effective time to fix bare areas and other lawn problems in cool season grasses.

5 Steps to patching a bare lawn spot

  1. Dig up the spot to a 6-in. depth, breaking apart the clumps. (In the event the issue was a result of a spilled chemical like gasoline or perhaps an herbicide, take off a few inches of surface soil.)
  2. Blend topsoil to enhance soil quality and benefit new sod or grass seed get off to an excellent beginning.
  3. Rake and tamp to firm and level the surface area to the encircling yard.
  4. Utilize the lawn product (whatever technique you select from the list above).
  5. Water the location properly.After you have finished the repairs, carry out these actions. Although you most likely are not capable to put a stop to bare areas entirely, it is possible to maintain your yard as healthy and green as is possible.

    Employing a fine spray from a water hose, always keep the ground damp, but definitely not flooded. Keeping the soil from drying out enables the roots from the grass seed to get deep into the ground.
    As soon as the grass is established and growing nicely, fertilize it with a common lawn fertilizer and start mowing the area with the remainder of the yard.

    Keep an eye on the spot carefully through the first season.

Following these steps and closely watching your lawn will help you avoid lawn problems in the future.

Comments are closed, but trackbacks and pingbacks are open.